Routine maintenance and maintenance of high pressure washer

With the rapid development of China's industrial and high-pressure cleaner technology, the requirements for the quality of industrial cleaning are getting higher and higher. Especially in some heavy industry occasions, such as petroleum, chemical plants, power plants and some other industrially polluted equipment and occasions, it is extremely important to ensure the cleaning effect and efficiency.

Let's analyze the causes and treatment methods of the insufficient water pressure of the high-pressure cleaner:

1. The high-pressure nozzle of the high-pressure cleaning machine is severely worn. Excessive wear of the high-pressure nozzle will affect the water pressure of the equipment. The new nozzle should be replaced in time.

2. Insufficient inlet water flow of the connected equipment leads to insufficient water flow, resulting in insufficient output pressure. Supply enough water flow in time to solve the problem of reduced water pressure.

3. There is air in the water inlet filter of the high pressure washer. After exhausting the air in the water inlet filter, make sure to output the standard water pressure.

4. After the overflow valve of the high-pressure washer ages, the overflow of the water flow will be large and the pressure will be low. When it is found that it is aging, it is necessary to replace the parts in time.

5. The high and low pressure water seal of the high pressure washer and the check valve of the inlet and outlet water have caused the leakage of the working pressure, which should be replaced in time.

6. The high-pressure pipe, filter device is kinked, bent or damaged, resulting in poor water flow and insufficient water pressure, which should be repaired in time.