What is the role and function of the rotary vibrating screen? What preparations must be made before installation?

Function and principle

The basic principle is to convert the rotary motion of the motor into a horizontal, vertical, and inclined three-dimensional motion by means of a weight (uneven weight) installed at the upper and lower ends of the motor shaft, and then convey this motion to the screen surface. If the phase angle of the upper and lower weights is changed, the traveling direction of the raw materials can be changed.

Features

1) Unique screen structure design, easy and fast screen replacement (only 5 to 10 minutes). In addition, this design allows the use of various screens (nylon, special dragon, PP screen).

2) Sieve design; delicate and easy to assemble, one person can operate the sieve.

3) Compared with other related brand manufacturers, it has a large screening area and high efficiency processing capacity.

4) Its parent network fully supports the fine mesh, so the fine mesh can have a long life alone, and the use of fine mesh consumables can be reduced. The long production process can reduce many costs.

Preparation for installation

1. Check whether the motor nameplate meets the requirements.

2. Use a 500 volt megohmmeter to measure the insulation resistance. The value should be dried for the stator winding. The drying temperature should not exceed 120 ° C.

3. Check the fasteners of the motor to prevent loosening.

4. Check the motor surface for damage and deformation.

5, check whether the rotation is flexible, if there is any abnormality, it should be ruled out.

6. Check the power supply for phase loss and run for 5 minutes with no load.

Installation and adjustment

1. The motor should be fastened on the mounting surface. The mounting surface must be smooth and flat.

2. The motor can be installed horizontally.